336 Excavator

  • Specs Summary
  • Minimum Power
    385 bhp (287 bkW)
  • Maximum Power
    520 bhp (388 bkW)
  • Emissions
    China Nonroad III, U.S. EPA Tier 3 Equivalent or U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or EU Stage II Equivalent
  • Frequency
    1800-2100 rpm

Cat® C13 ACERT™ Industrial Diesel Engine

Providing reliable power for applications requiring 287-388 bkW (385-520 bhp), Cat® C13 ACERT™ Industrial Diesel Engines are proven performers, providing greater options for customers who require powerful flexibility for their equipment. More importantly, they're backed by the world-class Cat dealer network ready to service and support every Cat industrial engine. Industries and applications powered by C13 ACERT engines include Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Specialty Ag Equipment, Surface Hauling Equipment, Trenchers and Underground Mining Equipment. C13 ACERT engines, with ratings: 287-388 bkW (385-520 bhp) @ 1800-2100 rpm, meet China Stage II, U.S. EPA Tier 3 equivalent or U.S. EPA Tier 2 equivalent, EU Stage IIIA equivalent or EU Stage II equivalent emission standards. U.S. EPA Tier 3 equivalent and EU Stage IIIA equivalent ratings are available using U.S. EPA and EU Flexibility. They are also available for other regulated and non-regulated areas.

Power Rating

  • Minimum Power 385 bhp (287 bkW)
  • Maximum Power 520 bhp (388 bkW)
  • Frequency 1800-2100 rpm

Emission Standards

  • Emissions China Nonroad III, U.S. EPA Tier 3 Equivalent or U.S. EPA Tier 2 Equivalent, EU Stage IIIA Equivalent or EU Stage II Equivalent

General

  • Engine Configuration Inline 6, 4-Stroke-Cycle Diesel
  • Bore 130 mm (5.12 in)
  • Stroke 157 mm (6.18 in)
  • Displacement 12.5 L (762.8 in³)
  • Aspiration Turbocharged Aftercooled (TA)
  • Compression Ratio 17.3:1
  • Combustion System Direct Injection
  • Rotation (from flywheel end) Counterclockwise

Engine Dimensions (Approximate. Final dimensions dependent on selected options)

  • Length 1295 mm (50.98 in)
  • Width 1186 mm (346.69 in)
  • Height 1053.8 mm (41.49 in)
  • Weight, Net Dry (Basic Operating Engine Without Optional Attachments) 908.4 kg (2002.7 lb)

Aftertreatment Dimensions (Approximate. Final dimensions dependent on selected options)

PETU Dimensions (Tier 4 Final, Stage IV Only)

Standard Equipment

Air Inlet System

  • Turbocharged
  • Air-to-Air Aftercooled

Control System

  • Electronic governing, PTO speed control
  • Programmable ratings
  • Automatic altitude compensation
  • Power compensation for fuel temperature
  • Programmable low and high idle and total engine limit
  • Electronic diagnostics and fault logging
  • Engine monitoring system SAE J1939 broadcast and control
  • ADEM™ A4 Electronic Control Unit (ECU)

Cooling System

  • Thermostats and housing, vertical outlet
  • Jacket water pump, centrifugal
  • Water pump, inlet

Exhaust System

  • Exhaust manifold, dry
  • Optional exhaust outlet

Flywheels and Flywheel Housing

  • SAE No. 1 flywheel housing

Fuel System

  • MEUI injection
  • Fuel filter, secondary (2 micron)
  • Fuel filter, tertiary (2 micron)
  • ACERT™ Technology
  • Fuel transfer pump
  • Fuel priming pump

Lube System

  • Crankcase breather
  • Oil cooler
  • Oil filler
  • Lube oil filter
  • Front sump oil pan
  • Oil dipstick
  • Gear driven oil pump

General

  • Vibration damper
  • Lifting eyes
  • Cold start capability to -20° C (-4° F)
  • Paint: Caterpillar yellow, with optional colors available at request

Optional Equipment