Electric Power

  • Specs Summary
  • Fuel Type
    Natural Gas, Biogas, Coal Gas
  • Maximum Electrical Efficiency
    42.5%
  • Gas Standby Rating
    800 ekW
  • Emissions/Fuel Strategy

Gas Generator CG132

From natural gas-fueled combined heat and power (CHP) systems and emergency power for facilities, to renewable biogas energy to support the local grid, or electricity generated from coal mine gases, Caterpillar has a wide range of reliable gas power solutions.

--- :@lang: en

Gas Generator Sets Specification

  • Fuel Type Natural Gas, Biogas, Coal Gas
  • Maximum Electrical Efficiency 42.5%
  • Maximum Standby Rating -
  • Frequency 50/60Hz
  • Gas Standby Rating 800 ekW
  • rpm 1500/1800rpm

Engine Specification

  • Engine Model CG132
  • Bore 5.2 in (132 mm)
  • Stroke 6.3 in (160 mm)
  • Displacement 2136 in3 (35 L)
  • Aspiration TA

Generator Set Dimension

  • Length 162.6 in (4130 mm)
  • Width 59 in (1490 mm)
  • Height 86 in (2184.4 mm)
  • Dry weight genset 15498.34 lb (7030 kg)

Generator Set Configurations

Standard Equipment

Air Inlet

  • Two-element single-stage air cleaner with enclosure and service indicator
  • Turbocharger for the CG132-8 with a water-cooled bearing case

Control Panels

  • TEM (Total Electronic Management)

Cooling

  • Engine driven water pumps for jacket water and after cooler
  • Jacket water and SCAC thermostats
  • Cat flanges on SCAC circuit
  • Electrical jacket water and aftercooler coolant pump
  • Flange connections for JW inlet and outlet
  • ANSI/DN customer flange connections for JW inlet and outlet
  • Cat flanges on SCAC circuit

Exhaust

  • Closed crankcase ventilation system
  • PEARL/Low resistence exhaust system

Fuel system

  • Electronic fuel metering valve
  • Pre-chamber spark plugs
  • Independently controlled cylinder monitoring and ignition system

Generator

  • Reactive droop
  • Bus bar connections
  • Winding temperature detectors
  • Anti-condensation space heater
  • 3-phase sensing and KVAR/PF control

Starting/Charging

  • 24V starting motors
  • Battery disconnect switch

General

  • Crankshaft vibration damper and guard

Optional Equipment

Air Inlet

  • Mounting stand
  • Air cleaner with precleaner

Cooling

  • CHP skid