Specifications
Engine
- Engine Model
- Cat® C27
- Net Power - SAE J1349:2011 - Standard Ambient
- 732hp
- Rated Speed
- 1800r/min
- Emissions
- Option 1 - U.S. EPA Tier 4 Final / EU Stage V
- Engine Power - ISO 14396:2002
- 786hp
- Gross Power - SAE J1995:2014
- 801hp
- Net Power - SAE J1349:2011 - High Ambient
- 681hp
- Emissions
- Option 2 - China Nonroad Stage III emissions standards, equivalent to U.S. EPA Tier 2
- Engine Power - ISO 14396: 2002
- 752hp
- Gross Power - SAE J1995:2014
- 766hp
- Net Power - SAE J1349:2011 - Standard Ambient
- 699hp
- Net Power - SAE J1349:2011 - High Ambient
- 648hp
- Bore
- 5.4in
- Stroke
- 6in
- Displacement
- 1649.5in³
- Peak Torque - Speed
- 2624lb/ft
- Torque Rise
- 18%
- Note
- Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Operating Specifications
- Operating Weight
- 165089lb
- Blade Capacity Range
- 20.8yd³
Transmission
- Transmission Type
- Cat Planetary Power Shift
- Converter Drive - Forward 1
- 4.5mile/h
- Converter Drive - Forward 2
- 8.3mile/h
- Converter Drive - Forward 3
- 14.2mile/h
- Converter Drive - Reverse 1
- 4.9mile/h
- Converter Drive - Reverse 2
- 9.1mile/h
- Converter Drive - Reverse 3
- 15.5mile/h
- Direct Drive - Forward 1
- Lock-up disabled
- Direct Drive - Forward 2
- 8.5mile/h
- Direct Drive - Forward 3
- 15.2mile/h
- Direct Drive - Reverse 1
- 5.4mile/h
- Direct Drive - Reverse 2
- 9.6mile/h
- Direct Drive - Reverse 3
- 16.4mile/h
- Note
- Travel speeds based on 45/65-45 L-5 46 ply tires.
Hydraulic System - Lift/Tilt
- Output at 2,000 rpm and 6900 kPa (1,000 psi)
- 82gal/min
- Cylinders, Double Acting - Lift, Bore and Stroke
- 133 mm × 1535 mm (5.25 in × 60.4 in)
- Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
- 210 mm × 188 mm (8.25 in × 7.4 in)
- Relief Valve Setting - Bulldozer (Large Pump)
- 2700psi
- Relief Valve Setting - Tilt Cylinders (Small Pump)
- 2920psi
Hydraulic System - Steering
- Steering System - Circuit
- Pilot, load sensing
- Steering System - Pump
- Piston, variable displacement
- Minimum Turning Radius - Over Blade
- 34ft
- Total Steering Angle
- 35°
- Maximum Flow
- 94.3gal/min
- Relief Valve Setting
- 4500psi
Service Refill Capacities
- Fuel Tank - Standard
- 286.6gal (US)
- Cooling System
- 54.9gal (US)
- Crankcase
- 20gal (US)
- Transmission
- 29.1gal (US)
- Differential - Final Drives - Front
- 71.6gal (US)
- Differential - Final Drives - Rear
- 68.9gal (US)
- Hydraulic System - Implement and Hydraulic Fan
- 68.9gal (US)
- Hydraulic System - Steering and Braking
- 34.9gal (US)
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- 8.5°
Brakes
- Brakes
- Meets ISO 3540:2011
Sound Performance - Tier 4 Final / Stage V
- Operator Sound Pressure Level (ISO 6396:2008)
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 116dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)*
- 114dB(A)
- Note (1)
- *Sound suppression equipped
- Note (2)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (3)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (4)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 2
- Operator Sound Pressure Level (ISO 6396:2008)
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 116dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)*
- 114dB(A)
- Note (1)
- *Sound suppression equipped
- Note (2)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (3)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (4)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Cab
- ROPS/FOPS
- ISO 3471:2008 and ISO 3449:2005 Level II Standards
Dimensions (Approximate)
- Height - Top of ROPS
- 17.2ft
- Height - Top of Exhaust Pipe
- 16.6ft
- Height - Top of Hood
- 12.7ft
- Ground Clearance
- 2ft
- Centerline of Front Axle to Hitch
- 7.5ft
- Centerline of Rear Axle to Edge of Bumper
- 12.5ft
- Wheel Base
- 15.1ft
- Length - With Blade on Ground
- 36.5ft
