Cat?� 3406C Fire Pump Engine | Tractor & Equipment Co.

Photos
360 Views

The Cat^?� 3406C Industrial Diesel Fire Pump Engine is offered in ratings ranging from 218-359 kW (292-482 hp) @ 1750-2300 rpm. These ratings are non-certified and available for global non-regulated areas. They are FM Approved and UL Listed. Additional 3406C ratings with or without radiators are available, but not FM approved or UL listed. Starting on demand is a must for a fire pump engine – always. Cat?� fire pump engines have a reputation for reliable starts and long efficient service.

PRINT
SHARE

Specifications

Power Rating

Maximum Power: 482hp
Rated Speed: 1750-2300 rpm
Minimum Power: 292hp

Emission Standards

Emissions: Non-Certified. Available for global non-regulated areas. FM Approved, UL Listed

General

Engine Configuration: Inline 6, 4-Stroke-Cycle Diesel
Bore: 5.4in
Stroke: 6.5in
Displacement: 893in³
Compression Ratio: 14.5:1
Aspiration: Turbocharged Aftercooled
Rotation from Flywheel End: Counterclockwise
Aftertreatment: -

Engine Dimensions - Approximate

Length: 65.4in
Height: 52.6in

Standard/Optional Features

Standard Equipment:

Air Inlet System
- Dry or watercooled manifold and turbocharger
Charging System
- Charging Alternator, 24 volt, 35 amp
Control System
- Hydra-mechanical governor
Cooling System
- Thermostats and housing
- Jacket water pump, gear driven, centrifugal
- Heat exchanger
- Expansion tank
- FM Required Raw Water Cooling Loops: 1.5" iron, horizontal or vertical, 1.5" 316 stainless steel, horizontal or vertical
- Optional Radiator, not UL listed or FM approved
Exhaust System
- Exhaust manifold, water-cooled (wet) or dry
- Exhaust elbow, dry, 152 mm (6 in), 4 bolt flange
Flywheels And Flywheel Housing
- SAE No. 1 flywheel
- SAE No. 1 flywheel housing
- SAE standard rotation
Fuel System
- Fuel filter, LH
- Fuel transfer pump
- Primary fuel filter / water separator
Instrumentation
- Instrument panel, LH
- Engine oil pressure gauge
- Fuel pressure gauge
- Water temperature gauge
- Service meter
Lube System
- Crankcase breather
- Oil cooler
- Lube oil filter
- Oil filler in valve cover and dipstick, both RH
- Rear sump oil pan
- Oil filler in valve cover
- Dipstick
Mounting System
- Supports
Power Take-offs
- Flywheel stub shaft
Protection System
- Stop-Start System, automatic (compatible with NFPA 20 requirements, able to be energized from either of two battery sources and capable of manual starter actuation)
General
- Vibration damper and guard
- Lifting eyes
- Paint - fire pump red, optional radiator painted black

Optional Equipment:

Contact Tractor & Equipment Co. today for all of your equipment needs!

Contact Us