Specifications
Engine
- Maximum Gross Power
- 42hp
- Engine Model
- Cat C2.4*
- Gross Power
- 42hp
- Net Power - 2,200 rpm - SAE J1349 R-ing
- 40hp
- Net Power - 2,200 rpm - ISO 9249 R-ing
- 40hp
- Bore
- 3.4in
- Stroke
- 4in
- Displacement
- 147in²
- Note
- *Engine meets U.S. EPA Tier 4 Final emission standards.
Weights
- Operating Weight
- 9414lb
Buckets
- Bucket Capacities
- 0.6-1.0 m3 (0.8-1.3 yd3)
- Bucket Capacities - General Purpose
- 0.6 m3 (0.8 yd3)
- Bucket Capacities - Light Material
- 1.0 m3 (1.3 yd3)
Transmission
- Travel Speed
- 12.4mile/h
Hydraulic System
- Main Relief
- 3481psi
- 3rd Auxiliary Flow
- 14gal/min
- Hydraulic Cycle Time - Lower, Float
- 2.4s
Loader Hydraulic System
- Hydraulic Cycle Time - Lift
- 4.4s
- Hydraulic Cycle Time - Dump
- 0.7s
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Service Refill Capacities
- Cooling System
- 3gal (US)
- Fuel Tank
- 11.4gal (US)
- Hydraulic System
- 6.3gal (US)
- Engine Oil
- 2.4gal (US)
Dimensions (Approximate) - Standard Lift
- Cab Height
- 8.25ft
- Ground Clearance
- 10in
- Wheel Base
- 6.42ft
- Overall Length - With Bucket*
- 15.75ft
- Reach at Maximum Dump Height*
- 2.33ft
- Dig Depth
- 6in
- Maximum Dump Height*
- 7.5ft
- Load Over Height
- 9.17ft
- Hinge Pin at Maximum Height
- 10.08ft
- Departure Angle - Degrees
- 30°
- Overall Length - With Forks
- 17.08ft
- Reach - Ground Level
- 2.67ft
- Maximum Reach
- 4.5ft
- Fork Depth Above Ground
- 2in
- Fork Height at Maximum Reach
- 4.67ft
- Maximum Fork Height
- 9.83ft
- Fork Reach at Maximum Height
- 2ft
- Turning Radius - Over Bucket*
- 13.17ft
- Turning Radius - Inside Tire**
- 5.92ft
- Width - Over Bucket*
- 5.83ft
- Tire Gauge
- 4.33ft
- Machine Width**
- 5.58ft
- Articulation Angle
- 40°
- Steering Angle
- 80°
- Dump Angle at Maximum Height
- 40°
- Note (1)
- *Vary with bucket size.
- Note (2)
- **Vary with tire size.
- Note (3)
- Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Dimensions (Approximate) - High Lift
- Cab Height
- 8.25ft
- Ground Clearance
- 10in
- Wheel Base
- 6.42ft
- Overall Length - With Bucket*
- 16.17ft
- Reach at Maximum Dump Height*
- 2.42ft
- Dig Depth
- 8in
- Maximum Dump Height*
- 8ft
- Load Over Height
- 9.67ft
- Hinge Pin at Maximum Height
- 10.58ft
- Departure Angle - Degrees
- 30°
- Overall Length - With Forks
- 17.58ft
- Reach - Ground Level
- 3.25ft
- Maximum Reach
- 4.92ft
- Fork Depth Above Ground
- 2in
- Fork Height at Maximum Reach
- 4.67ft
- Maximum Fork Height
- 10.33ft
- Fork Reach at Maximum Height
- 2ft
- Turning Radius - Over Bucket*
- 13.42ft
- Turning Radius - Inside Tire**
- 5.92ft
- Width - Over Bucket*
- 5.83ft
- Tire Gauge
- 4.33ft
- Machine Width**
- 5.58ft
- Articulation Angle
- 40°
- Steering Angle
- 80°
- Dump Angle at Maximum Height
- 40°
- Note (1)
- *Vary with bucket size.
- Note (2)
- **Vary with tire size.
- Note (3)
- Dimensions listed are based on the machine configured with cab with air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Operating Specifications - Standard Lift
- Tire Size
- 33 × 15.5-16.5, 12 PR
- Rated Bucket Capacity
- 0.8yd³
- Breakout Force
- 6160lbf
- Operating Weight
- 9414lb
- Rated Operating Load at Full Turn - Bucket***
- 2701lb
- Straight Tipping Load - Bucket***
- 6415lb
- Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
- 5401lb
- Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
- 5512lb
- Rack Back - Transport Position
- 51°
- Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
- 3366lb
- Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
- 2524lb
- Note (1)
- *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
- Note (2)
- **Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
- Note (3)
- ***Manual quick coupler, precleaner hood.
- Note (4)
- Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Operating Specifications - High Lift
- Tire Size
- 33 × 15.5-16.5, 12 PR
- Rated Bucket Capacity
- 0.8yd³
- Breakout Force
- 6204lbf
- Operating Weight
- 9462lb
- Rated Operating Load at Full Turn - Bucket***
- 2502lb
- Straight Tipping Load - Bucket***
- 5975lb
- Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
- 5004lb
- Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
- 5115lb
- Rack Back - Transport Position
- 51°
- Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
- 3148lb
- Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
- 2361lb
- Note (1)
- *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
- Note (2)
- **Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
- Note (3)
- ***Manual quick coupler, precleaner hood.
- Note (4)
- Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Maximum Material Densities - General Purpose
- Bucket Type
- General Purpose
- Rated Capacity
- 0.8yd³
- Dump Height
- 90in
- Maximum Material Density
- 3169lb/yd³
- Bucket Width
- 70in
- Note
- Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Maximum Material Densities - Light Material
- Bucket Type
- Light Material
- Rated Capacity
- 1.3yd³
- Dump Height
- 85in
- Maximum Material Density
- 1989lb/yd³
- Bucket Width
- 74in
- Note
- Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Sustainability
- Recyclability
- 97%
