Cat® Electric Rope Shovels combine immense payload capability with low maintenance requirements and high reliability to deliver the lowest cost-per-ton loading solution for long-life mines. The Cat 7495 with HydraCrowd features AC IGBT electrics for greater uptime, lower operating costs and faster cycle times. The state-of-the-art operator’s cab is the most comfortable and productivity-enhancing in the industry. The 7495 is available with a number of new technologies that provide operator assist and machine self-protection, enable proactive maintenance, and deliver real-time information on productivity and performance. An entirely electric machine, the 7495 is cleaner and more efficient than diesel-powered machines, plus its regenerative braking technology feeds electrical energy back to the grid.

Specifications

Dimensions

Dipper Payload
120t
Dipper Capacity
30.6-62.7 m3 (40-82 yd3)
Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified)
120t
Note
Dependent on application and material density

Weights

Working Weight - With Dipper and Standard Links
3066000lb
Ballast - Furnished By Customer
667150lb
Note (1)
These weights will vary slightly depending upon dipper and optional equipment selection
Note (2)
All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

Main Structures

Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads
38ft
Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard
36ft
Hoist
A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Ground Bearing Pressure - Note
Ground bearing pressure is dependent upon many factors
Upper Works Overall Width - Including Standard Walkways
41.9ft
Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads
46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
Swing
Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Planetary Propel
Dual-motor independent drive
Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard
36 m2 (382 kPa); 386 ft2 (55 psi)

Lube System

Type
Automatic, single-line system for open gear lubricant and grease
Components (1)
Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room
Components (2)
External FastFil from lower level

Electrical

Power Requirements - Note
Other voltage options available to suit customer requirements
Drive
IGBT Acutrol drive system
Power Requirements - 50 Hz
6,000V, 6,600V, 7,200V, 11,000V
Power Requirements - Average Power Demand
945-1322 kW
Power Requirements - Voltage
3 phase, 50/60 Hz, 7,200V
Power Requirements - 60 Hz
7,200V, 13,800V
System Voltage - Nominal
50/60 Hz, 7,200V
Power Requirements - Peak power
3778 kW

Front End

Rope Data - Boom Suspension - No.
4
Rope Data - Boom Suspension - Diameter
3.25in
Type
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Rope Data - Note
High impact ropes available as an option
Rope Data - Dipper Trip - No.
1
Rope Data - Hoist - No.
2
Rope Data - Hoist - Diameter
2.75in
Rope Data - Dipper Trip - Diameter
0.75in
Crowd (1)
HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft.
Crowd (2)
(Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.

Dimensions - Working Ranges

Dipper Capacities
30.6-62.7 m3 (40-82 yd3)
Maximum Dumping Height
28.9ft
Dipper Payload
120ton (US)
Operating Weight
3066000lb

Dimensions (Approximate) - Optimal Working Ranges*

Cutting Radius - Maximum
80ft
Revolving Frame Tail Swing Radius
30.5ft
Cutting Height - Maximum
53.5ft
Radius of Level Floor
56.1ft
Dumping Height - With Clearance to Open Dipper Door
28.9ft
Note (1)
Optimal working ranges based on loading a Cat 795F AC truck.
Note (2)
*All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) crawlers.

Contact Tractor & Equipment Co. today for all of your equipment needs!

Contact Us