Specifications
Engine
- Gross Power - SAE J1995:2014
- 435hp
- Net Power - SAE J1349:2011
- 405hp
- Net Power - ISO 9249:2007
- 405hp
- Engine Power - ISO 14396:2002
- 426hp
- Engine Model
- C15 Cat®
- Emissions
- U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
- Rated Speed
- 1800
- Torque Rise
- 33%
- Bore
- 5.4in
- Stroke
- 6.7in
- Displacement
- 927.6in³
- High Idle Speed
- 2300r/min
- Low Idle Speed
- 800r/min
- Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
- 9298ft
- Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
- 9098ft
- Note
- Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
- Operating Weight (Tier 4 Final/Stage V)
- 90207lb
- Operating Weight (Tier 3/Stage IIIA equivalent)
- 89186lb
- Maximum Operating Weight (Tier 4 Final/Stage V)
- 92568lb
- Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
- 91549lb
Transmission
- Transmission Type
- Planetary - Powershift - ECPC
- Direct Drive - Forward 1
- 4.2mile/h
- Direct Drive - Forward 2
- 7.5mile/h
- Direct Drive - Reverse 1
- 4.3mile/h
- Direct Drive - Reverse 2
- 8.6mile/h
Hydraulic System
- Pump Flow at 1800 rpm
- 30.9gal/min
- Main Relief Pressure
- 3771psi
- Maximum Supply Pressure
- 3495psi
- Lift System
- Double Acting Cylinder
- Bore
- 4.7in
- Stroke
- 42.1in
Service Refill Capacities
- Cooling System
- 30.6gal (US)
- Engine Crankcase
- 9gal (US)
- Transmission
- 17.4gal (US)
- Fuel Tank
- 206.6gal (US)
- Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
- 8.5gal (US)
- Differential - Final Drives - Front
- 26.4gal (US)
- Differential - Final Drives - Rear
- 29.1gal (US)
- Hydraulic Tank Only
- 35.4gal (US)
- Note
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H
Axles
- Front
- Planetary - Fixed
- Rear
- Planetary - Oscillating
- Oscillation Angle
- ±5°
Braking System
- Service Brakes
- Multi Disc Wet (Enclosed) 2 WHL
- Parking Brake
- Drum and Shoe, Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final / Stage V
- Operator Sound Pressure Level (ISO 6396:2008)
- 73dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 113dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)*
- 110dB(A)
- Note (1)
- * Sound suppression equipped
- Note (2)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (3)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (4)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
- Operator Sound Pressure Level (ISO 6396:2008)
- 73dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 113dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)*
- 110dB(A)
- Note (1)
- * Sound suppression equipped
- Note (2)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (3)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Note (4)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Hydraulic System - Steering
- Steering System - Circuit
- Pilot operated, load sensing
- Bore
- 4.5in
- Stroke
- 22.7in
- Steering System - Pump
- Piston - Variable Displacement
- Maximum System Flow
- 170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
- Steering Pressure Limited
- 3481psi
- Vehicle Articulation Angle
- 86°
Dimensions (Approximate)
- Height to Top of Air Conditioning Condenser
- 14.99ft
- Height - Cab Roof
- 13.75ft
- Height - Top of Beacon
- 15.63ft
- Height - Top of Exhaust Pipe
- 14.56ft
- Height - Top of Hood
- 10.87ft
- Ground Clearance - Bumper
- 3.15ft
- Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
- 9.38ft
- Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
- 10.16ft
- Hitch to Centerline of Front Axle
- 6.07ft
- Wheel Base
- 12.14ft
- Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
- 28.59ft
- Ground Clearance
- 2.11ft
- Width - Over Wheels
- 12.47ft
- Turning Radius - Inside of Wheels
- 9.18ft
Straight Blade
- Width – Moldboard Length
- 14.16ft
- Width - Over End Bits
- 14.75ft
- Height with Cutting Edge and Screen
- 6.23ft
- Maximum Depth of Cut
- 1.5ft
- Maximum Lift above Ground
- 4.19ft
- Capacity, Rated
- 16.1yd³
- Overall Machine Length (includes rear radiator guard, measured to cutting edge)
- 28.59ft
Semi U-Blade
- Width – Moldboard Length
- 14.66ft
- Width - Over End Bits
- 14.83ft
- Height with Cutting Edge and Screen
- 6.63ft
- Maximum Depth of Cut
- 2.03ft
- Maximum Lift above Ground
- 3.825ft
- Capacity, Rated
- 20.9yd³
- Overall Machine Length (includes rear radiator guard, measured to cutting edge)
- 29.54ft
U-Blade
- Width – Moldboard Length
- 14.25ft
- Width - Over End Bits
- 14.41ft
- Height with Cutting Edge and Screen
- 6.62ft
- Maximum Depth of Cut
- 2.03mm
- Maximum Lift above Ground
- 3.79ft
- Capacity, Rated
- 22.9yd³
- Overall Machine Length (includes rear radiator guard, measured to cutting edge)
- 30.7ft
Wheels
- Combination Tips (Weight Group)
- 21125lb
- Plus Tips - Weight (Group)
- 22002lb
- Paddle Tips - Weight (Group)
- 20540lb
- Diamond Tips Weight (Group)
- 23997lb
- Outside Diameter
- 77.6in
- Outside Diameter - Diamond
- 78.1in
- Drum Diameter
- 63.4in
- Drum Width
- 47.2in
- Feet Per Row
- 6
- Feet Per Wheel
- 30
- Replaceable
- Weld On
- Width Over Drums
- 3800mm
- Tip Height
- 179mm
- Tip Height - Diamond
- 7.25in
