Specifications
Engine
- Gross Power - SAE J1995:2014
- 562hp
- Net Power - SAE J1349:2011
- 496hp
- Net Power - ISO 9249:2007
- 502hp
- Engine Power - ISO 14396:2002
- 553hp
- Engine Model
- C18
- Emissions
- U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA
- Rated Speed
- 1900 rpm
- Peak Torque ( 1,400 rpm )
- 2275lbf·ft
- Torque Rise
- 52%
- Bore
- 5.71in
- Stroke
- 7.2in
- Displacement
- 1104.5in³
- High Idle Speed
- 2120r/min
- Low Idle Speed
- 750r/min
- Maximum Altitude - Without Derating
- 7500ft
- Note
- Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications
- Operating Weight (Tier 4 Final/Stage V)
- 124063lb
- Operating Weight (Tier 3/Stage IIIA equivalent)
- 123321lb
- Maximum Operating Weight (Tier 4 Final/Stage V)
- 126364lb
- Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
- 125622lb
Transmission
- Transmission Type
- Planetary - Powershift - ECPC
- Direct Drive - Forward 1
- 4.3mile/h
- Direct Drive - Forward 2
- 7.8mile/h
- Direct Drive - Reverse 1
- 4.6mile/h
- Direct Drive - Reverse 2
- 8.2mile/h
Hydraulic System - Lift
- Lift System - Circuit
- Flow Sharing Implement; Pilot Operated LS Valve w/EH
- Lift System - Pump
- Variable displacement piston
- Max Flow @ 2000 rpm
- 79gal/min
- Relief Valve Setting - Lift
- 4206psi
- Cylinders, Double Acting: Lift, Bore, Stroke
- 137.9 mm x 1021 mm (5.5 in x 40.2 in)
- Pilot System
- Variable displacement piston
- Pilot Relief Valve Setting
- 551psi
Hydraulic System - Steering
- Steering System - Circuit
- Flow Sharing Implement; Pilot, load sensing
- Steering System - Pump
- Piston – Variable Displacement
- Max Flow @ 2000 rpm
- 79gal/min
- Relief Valve Setting - Steering
- 3495lb/in²
- Total Steering Angle
- 86
- Steering Cycle Times - High Idle
- 3.9s
- Steering Cycle Times - Low Idle
- 6.4s
Service Refill Capacities
- Fuel Tank
- 209gal (US)
- Diesel Exhaust Fluid Tank
- 9gal (US)
- Cooling Systems - Tier 4 Final/EU Stage V
- 40gal (US)
- Cooling System - Tier 3/Stage IIIA Equivalent
- 37.2gal (US)
- Engine Crankcase
- 16gal (US)
- Transmission
- 21.9gal (US)
- Differential - Final Drives - Front
- 49gal (US)
- Differential - Final Drives - Rear
- 50gal (US)
- Hydraulic System - Implement/Steering
- 46.2gal (US)
- Hydraulic Tank Only
- 27.2gal (US)
- Note
- - All nonroad Tier 4 Final/Stage V diesel engines are required to use: - Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) for EPA and 10 ppm (mg/kg) for EU sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.4 kg of refrigerant which has a CO2 equivalent of 2.002 metric tonnes.
Axles
- Front
- Planetary – Fixed
- Rear
- Planetary – Oscillating
- Oscillation Angle
- ±6°
Braking System
- Service Brakes
- Multi Disc Wet (Enclosed) 2 WHL
- Parking Brake
- Spring Applied, Hydraulic Released
Sound Performance - Tier 4 Final/EU Stage V
- Operator Sound Level (ISO 6396:2008) - Standard
- 72dB(A)
- Machine Sound Level (ISO 6395:2008) - Standard
- 111dB(A)
- Operator Sound Level (ISO 6396:2008) - Suppression
- 72dB(A)
- Machine Sound Level (ISO 6395:2008) - Suppression
- 109dB(A)
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
- Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (3)
- The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Sound Performance - Tier 3 / Stage IIIA
- Operator Sound Level (ISO 6396:2008) - Standard
- 72dB(A)
- Machine Sound Level (ISO 6395:2008) - Standard
- 112dB(A)
- Operator Sound Level (ISO 6396:2008) - Suppression
- 72dB(A)
- Machine Sound Level (ISO 6395:2008) - Suppression
- 110dB(A)
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
- Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (3)
- The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Dimensions (Approximate)
- Height to Top of Beacon
- 15.2ft
- Height to Top of Air Conditioning Condenser
- 15.2ft
- Height - Cab Roof
- 14.1ft
- Height - Top of Exhaust Pipe
- 15.1ft
- Height - Top of Hood
- 11.3ft
- Ground Clearance to Hitch
- 2.1ft
- Ground Clearance to Transmission Guard
- 2.1ft
- Ground Clearance to Bottom of Bumper
- 3.2ft
- Centerline of Rear Axle to Rear Compactor Guard
- 11.3ft
- Hitch to Centerline of Front Axle
- 7.5ft
- Wheel Base
- 14.9ft
- Width over Front Striker Bars
- 12.9ft
- Width over Rear Striker Bars
- 12.9ft
- Width over Platform
- 10.5ft
- Width over Drums
- 14ft
- Overall Machine Length with Semi U-Blade
- 35.8ft
Straight Blade
- Capacity
- 25.9yd³
- Overall Width
- 17ft
- Height
- 7.4ft
- Height of Cutting Edge
- 3.7ft
- Digging Depth
- 1.2ft
- Ground Clearance
- 5.7ft
- Turning Radius – Outside Corner of Blade
- 28.7ft
- Turning Radius - Inside of Wheels
- 11.9ft
- Weight
- 6894lb
- Total Operating Weight
- 123000lb
Semi U-Blade
- Capacity
- 29.3yd³
- Overall Width
- 17.4ft
- Height
- 7.5ft
- Height of Cutting Edge
- 4.1ft
- Digging Depth
- 1.2ft
- Ground Clearance
- 5.7ft
- Turning Radius – Outside Corner of Blade
- 28.9ft
- Turning Radius – Inside of Wheels
- 11.9ft
- Weight
- 7963lb
- Total Operating Weight
- 124063lb
U-Blade
- Capacity
- 33.6yd³
- Overall Width
- 17.4ft
- Height
- 7.2ft
- Height of Cutting Edge
- 4.1ft
- Digging Depth
- 3.1ft
- Ground Clearance
- 3.9ft
- Turning Radius – Outside Corner of Blade
- 28.8ft
- Turning Radius – Inside of Wheels
- 11.9ft
- Weight
- 7696lb
- Total Operating Weight
- 123785lb
Wheels
- Combination Tips (Weight Group)
- 28250lb
- Plus Tips - Weight (Group)
- 29784lb
- Paddle Tips - Weight (Group)
- 272227lb
- Chopper Tips (Weight Group)
- 28404lb
- Diamond Tips Weight (Group)
- 32659lb
- Outside Diameter
- 83.8in
- Outside Diameter - Diamond
- 84.3in
- Drum Diameter
- 69.7in
- Drum Width
- 55.1in
- Feet Per Row
- 8
- Feet Per Wheel
- 40
- Replaceable
- Weld on
- Width Over Drums
- 4280mm
- Tip Height
- 179mm
- Tip Height - Diamond
- 7.25in