Specifications
Engine
- Gross Power - SAE J1995
- 98HP
- Net Power - SAE 1349
- 95HP
- Displacement
- 232in³
- Bore
- 3.9in
- Stroke
- 4.7in
- Net Power
- 95HP
- Net Power - ISO 9249
- 95HP
- Engine Model
- Cat C3.8 DIT (turbo)
- Peak Torque - 1,500 rpm - SAE J1995
- 246ft·lbf
Operating Specifications
- Rated Operating Capacities - 35% Tipping Load
- 3480lb
- Tipping Load
- 9945lb
- Breakout Force - Tilt Cylinder
- 7270lb
- Breakout Force - Lift Cylinder
- 6162lb
- Rated Operating Capacity with Optional Counterweight
- 5240lb
- Ground Contact Area - With 400 mm/15.7 in Track
- 2184in²
- Ground Pressure - With 400 mm/15.7 in Track
- 5.3psi
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics,
- Rated Operating Capacities - 50% Tipping Load
- 4970lb
- Ground Contact Area - With 450 mm/17.7 in Track
- 2463in²
- Ground Pressure - With 450 mm/17.7 in Track
- 4.7psi
Weights
- Operating Weight
- 11464lb
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics,
Service Refill Capacities
- Cooling System
- 4.1Gal
- Engine Crankcase
- 3.5gal (US)
- Fuel Tank
- 31.7gal (US)
- Hydraulic System
- 14.5gal (US)
- Hydraulic Tank
- 10.3gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 5gal (US)
Dimensions
- Length - Track on Ground
- 69.6in
- Overall Length - Track
- 89.4in
- Height - Top of Cab
- 83.6in
- Ground Clearance
- 9.6in
- Departure Angle
- 33°
- Maximum Dump Angle
- 54°
- Vehicle Width (450 mm/17.7 in tracks)
- 78in
- Turning Radius from Center - Coupler
- 58.1in
- Rack Back Angle - Maximum Height
- 81°
- Reach - Maximum Lift/Dump
- 33.6in
- Vehicle Width (400 mm/15.7 in tracks)
- 76in
- Bucket Pin Reach - Maximum Lift
- 19.4in
- Bucket Pin Height - Carry Position
- 7.1in
- Turning Radius from Center - Bucket (racked)
- 91.1in
- Maximum Reach - With Arms Parallel to Ground
- 51.9in
- Length - Without Bucket
- 125.5in
- Length - With Bucket on Ground
- 154.7in
- Clearance at Maximum Lift and Dump
- 94.5in
- Bucket Pin Height - Maximum Lift
- 126.3in
- Maximum Overall Height
- 158.7in
- Roll Back Angle
- 25°
- Turning Radius from Center - Machine Rear
- 74in
- Note
- Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, 2036 mm (80 in) low profile bucket, 400 mm (15.7 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics,
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
Hydraulic System
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
- 4061psi
- Hydraulic Flow - Standard - Loader Hydraulic Pressure
- 3335psi
- Hydraulic Flow - Standard - Hydraulic Power (Calculated)
- 44HP
- Hydraulic Flow - Standard - Loader Hydraulic Flow
- 23gal/min
- Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
- 32gal/min
- Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
- 76HP
Power Train
- Travel Speed - Forward or Reverse - Two Speed
- 8.4mile/h
- Travel Speed - Forward or Reverse - One Speed
- 5.2mile/h
Noise Level
- Note (2)
- *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee
- Inside Cab*
- 83dB(A)
- Note (3)
- **The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
- Note (1)
- Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
- Outside Cab**
- 104dB(A)
Air Conditioning System (if equipped)
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
