Specifications
Operating Specifications
- Rated Load Capacity
- 12000lb
- Maximum Lift Height
- 54.9ft
- Maximum Forward Reach
- 42ft
- Top Travel Speed
- 21mile/h
- Maximum Lift Height (o/r Down)
- 54.9ft
- Drawbar Pull - Loaded
- 26510lb
- Turning Radius - Over Tires
- 14.1ft
- Capacity at Maximum Height (o/r Down)
- 5000lb
- Capacity at Maximum Reach (o/r Down)
- 3500lb
- Frame Leveling
- 10°
- Operating Weight
- 34182lb
- Maximum Rated Load Capacity
- 12000lb
Engine
- Engine Model
- Cat® C3.6L*
- Gross Power - Basic
- 134hp
- Note
- *Meets U.S. EPA Tier 4 Final emission standards.
Tires
- Standard
- 400/75-28 Duraforce Air
- Optional
- 400/75-28 Duraforce Foam; 360/85-28 Telemaster Solid; 17.5 × 25 16PR Air; 17.5 × 25 12PR Foam; 400/75-28 Non-Marking Air; 400/75-28 Non-Marking Foam
Service Refill Capacities
- Fuel Tank
- 38gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 5.7gal (US)
- Hydraulic System
- 50gal (US)
Hydraulic System
- Pump Type
- Variable displacement load sensing axial piston pump
- Auxiliary Hydraulic Flow
- 25gal/min
- Auxiliary Hydraulic Pressure
- 3307psi
Boom Performance
- Boom Up
- 17s
- Boom Down
- 14.4s
- Tele In
- 15.3s
- Tele Out
- 19.7s
Axles
- Types (1)
- Trunnion mounted planetary 55-degree steer axles
- Types (2)
- High bias limited slip differential on front axle
Braking System
- Parking Brakes
- Wet disc, spring applied hydraulic release on front axle
- Service Brakes
- Inboard wet disc brakes on front and rear axles
Transmission Speeds
- Forward
- 4 Speeds
- Reverse
- 3 Speeds
Optional Work Tool Attachments
- Carriages: Standard Tilt - Option 1
- 50in
- Truss with Winch - Option 1
- 3ft
- Carriages: Swing, 100°
- 72in
- Carriages: Dual Hydraulic Fork Positioner - Option 2
- 72in
- Carriages: Dual Hydraulic Fork Positioner - Option 1
- 50in
- Buckets: General Purpose - Option 1
- 1.3yd³
- Truss Booms - Option 1
- 12ft
- Carriages: Standard Tilt - Option 3
- 72in
- Buckets: Multi Purpose
- 1.3yd³
- Forks: Pallet - Option 2
- 60in
- Note
- *For use with 1525 mm (60 in) forks or larger
- Buckets: General Purpose - Option 2
- 2yd³
- Fork Extensions*
- 90in
- Forks: Pallet - Option 1
- 48in
- Coupler
- Hydraulic IT Coupler (Includes Auxiliary Electronics)
- Material Handling Arm
- Adjustable 2-4 m (Adjustable 6.7-13.2 ft)
- Forks: Pallet - Option 3
- 72in
- Carriages: Side Tilt - Option 2
- 72in
- Forks: Block/Cubing
- 48in
- Truss with Winch - Option 2
- 12ft
- Fork Mounted - Hook
- Lifting Hook
- Carriages: Side Shift
- 48in
- Truss Booms - Option 2
- 15ft
- Buckets: Grapple
- 1.7yd³
- Fork Mounted - Hopper
- Trash Hopper
- Carriages: Side Tilt - Option 1
- 50in
- Carriages: Standard Tilt - Option 2
- 60in
- Fork Mounted - Truss Boom
- Adjustable 2.1-3.6 m (Adjustable 7-12 ft)
- Fork Mounted - Work Platform
- 1220 mm × 2438 mm (4 ft × 8 ft)