Specifications
Engine
- Engine Model
- Cat C9.3
- Bore
- 4.5in
- Stroke
- 45.2in
- Displacement
- 567.5in³
- Peak Engine Torque Gross (SAE J1995)
- 1275ft·lbf
- Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
- Cat® C9.3
- No Engine De-rating Below
- 3000ft
- Peak Engine Torque Net (SAE J1349)
- 1263ft·lbf
- Peak Engine Torque Speed
- 1200r/min
- Note (1)
- The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
- Emissions
- The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
- Note (3)
- Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
- Note (2)
- The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
- Note (4)
- DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio
- Gross Power - SAE J1995:2014
- 342hp
- Net Power - ISO 14396
- 338hp
- Net Power - SAE J1349:2011
- 334hp
Weights
- Rated Payload
- 26.5ton (US)
Body Capacities
- Heaped (SAE 2:1)
- 19.6yd³
- Struck
- 14.4yd³
- Tailgate Heaped SAE 2:1
- 20.4yd³
- Tailgate Struck
- 14.5yd³
Transmission
- Forward - 1
- 5mT/hr
- Forward - 2
- 9.4mT/hr
- Forward - 3
- 14.4mT/hr
- Forward - 4
- 22.1mT/hr
- Forward - 5
- 30.7mT/hr
- Forward - 6
- 36.3mT/hr
- Reverse - 1
- 5.5mT/hr
Service Refill Capacities
- Fuel Tank
- 91gal (US)
- Cooling System
- 18gal (US)
- Hydraulic System
- 29.1gal (US)
- Engine Crankcase
- 8gal (US)
- Transmission
- 10gal (US)
- Final Drives/Differential
- 33gal (US)
- Output Transfer Gear Box
- 5gal (US)
- Steering/Hoist Hydraulic System
- 24gal (US)
- Final Drive - Each
- 1.6gal (US)
- DEF Tank
- 4gal (US)
Sound Levels
- Interior Cab
- 69dB(A)
- Note (1)
- The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f
- Note (2)
- Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Body Hoist
- Raise Time
- 10s
- Lower Time
- 8s
Standards
- Brakes
- ISO 3450 – 2011
- Cab - FOPS
- ISO 3449 Level II – 2008
- Cab - ROPS
- ISO 3471 – 2008
- Steering
- ISO 5010 – 2007
Operating Weights
- Total - Loaded
- 103886lb
- Rear Axle - Rated Load
- 23699lb
- Total - Empty
- 50975lb
- Total - Rated Load
- 52910lb
- Center Axle - Loaded
- 33944lb
- Front Axle - Rated Load
- 5511lb
- Center Axle - Rated Load
- 23699lb
- Center Axle - Empty
- 10242lb
- Rear Axle - Loaded
- 33457lb
- Front Axle - Loaded
- 36484lb
- Rear Axle - Empty
- 9757lb
- Front Axle - Empty
- 30974lb
Body Plate Thickness
- Side Plates
- 0.43in
- Front Plate
- 0.28in
- Base Plate
- 0.51in
Steering
- Lock to Lock
- 4.75 seconds @ 60 rpm
Body Plate
- Type
- High strength Brinell HB450 wear resistant steel
Turning Circle
- Turning Dimensions - Inside Radius
- 153in
- Turning Dimensions - Aisle Width
- 210in
- Turning Dimensions - SAE Turning Radius
- 294in
- Turning Dimensions - Clearance Radius
- 318in
- Turning Dimensions - Steer Angle - Left/Right
- 45°
- Note
- Dimensions are for machines equipped with 23.5R25 tires.
Optimal Loader/Truck Pass Matching
- Wheel Loader: 950M - Passes
- 5
- Wheel Loader: 962M - Passes
- 4-5
- Wheel Loaders: 966M/966M XE - Passes
- 4
- Hydraulic Excavators: 336F/336F XE - Passes
- 5-6
- Wheel Loaders: 972M/972M XE - Passes
- 3-4
- Hydraulic Excavators: 349F/349F XE - Passes
- 4-5
