Specifications
Engine - Tier 4 Final/EU Stage V
- Engine Model
- Cat C7.1
- Net Power (SAE J1349:2011)
- 249HP
- Net Power (ISO 9249:2007)
- 249HP
- Emissions
- U.S. EPA Tier 4 Final/EU Stage V
- Rated Speed
- 2200r/min
- Gross Power (SAE J1995:2014)
- 284HP
- Engine Power (ISO 14396:2002)
- 275HP
- Peak Torque - 1,400 rpm
- 902lb/ft
- Torque Rise
- 52%
- Bore
- 4.1in
- Stroke
- 5.3in
- Displacement
- 427.8in³
- High Idle Speed
- 2270r/min
- Low Idle Speed
- 800r/min
- Maximum Altitude without Derating
- 9842.5ft
- Note
- Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Operating Specifications - Tier 4 Final/EU Stage V
- Operating Weight
- 48526lb
Scoops
- Chip Scoop Doze Capacity
- 37.9yd³
- Chip Scoop Carry Capacity
- 19yd³
Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
- Engine Model
- Cat C7.1
- Emissions
- Brazil MAR-1 and China Nonroad Stage III, equivalent to Tier 3/EU Stage IIIA
- Rated Speed
- 2200r/min
- Net Power (SAE J1349:2011)
- 249HP
- Gross Power (SAE J1995:2014)
- 286HP
- Engine Power (ISO 14396:2002)
- 275HP
- Peak Torque - 1,400 rpm
- 749lb/ft
- Torque Rise
- 26%
- Bore
- 4.1in
- Stroke
- 5.3in
- Displacement
- 427.8in³
- High Idle Speed
- 2270r/min
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA
- Operating Weight
- 47887lb
Operating Specifications - Tier 4 Final/EU Stage V - Scoop
- Operating Weight
- 52280lb
Operating Specifications - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Scoop
- Operating Weight
- 51639lb
Transmission
- Transmission Type
- Cat Planetary Power Shift
- Forward - 1
- 3.7mile/h
- Forward - 2
- 6.5mile/h
- Forward - 3
- 11.2mile/h
- Forward - 4
- 19.4mile/h
- Reverse - 1
- 4.2mile/h
- Reverse - 2
- 7.3mile/h
- Reverse - 3
- 12.8mile/h
- Reverse - 4
- 22.1mile/h
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
- Pilot operated LS valve with EH
- Lift/Tilt System
- Variable displacement piston
- Maximum Flow at 2,200 rpm
- 23.5gal/min
- Relief Valve Setting - Lift/Tilt
- 3190psi
- Cylinders, Double Acting - Lift, Bore and Stroke
- 120 mm × 915 mm (4.7 in × 36.0 in)
- Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke
- 101.6 mm × 234 mm (4.0 in × 9.2 in)
- Pilot System
- Open center, fixed displacement gear
- Pilot Relief Valve Setting
- 3046psi
Hydraulic System - Steering
- Steering System - Circuit
- Pilot, load sensing
- Steering System - Pump
- Variable displacement piston
- Maximum Flow at 2,200 rpm
- 38.8gal/min
- Relief Valve Setting - Steering
- 4003psi
- Total Steering Angle
- 72°
- Steering Cycle Times - High Idle
- 3s
- Steering Cycle Times - Low Idle
- 8.2s
Service Refill Capacities
- Fuel Tank
- 132.1gal (US)
- Diesel Exhaust Fluid Tank
- 4.2gal (US)
- Cooling Systems - Tier 4 Final/EU Stage V
- 21.4gal (US)
- Cooling Systems - Brazil MAR-1 and China NonroadStage III, equivalent to Tier 3/EU Stage IIIA
- 19.3gal (US)
- Engine Crankcase
- 5.3gal (US)
- Transmission
- 13.2gal (US)
- Differential - Final Drives - Front
- 17.2gal (US)
- Differential - Final Drives - Rear
- 17.2gal (US)
- Hydraulic System - Implement/Steering
- 34.1gal (US)
- Hydraulic Tank Only
- 19.8gal (US)
Axles
- Front
- Planetary – Fixed
- Rear
- Planetary – Oscillating
- Oscillation Angle
- ±10°
Braking System
- Service Brakes
- Single Disc Wet (enclosed) 4 WHL
- Parking Brake
- Drum and Shoe, Spring Applied, Hydraulic Released
Dimensions (Approximate)
- Height to Top of Beacon
- 13.1ft
- Height - Top of Cab
- 12.1ft
- Height - Top of Exhaust Pipe
- 11.3ft
- Height - Top of Hood
- 8.7ft
- Height to Top of Radiator Guard
- 8ft
- Ground Clearance to Hitch
- 1.4ft
- Ground Clearance to Transmission Guard
- 1.4ft
- Ground Clearance to Bottom of Bumper
- 2.3ft
- Centerline of Rear Axle to Bumper
- 6.5ft
- Centerline of Front Axle to Hitch
- 5.5ft
- Wheel Base
- 11ft
- Width over Platform
- 10.3ft
- Overall Length to Front Tire
- 21ft
- Overall Machine Length with Straight Blade
- 23.6ft
- Overall Machine Length with Coal Blade
- 25.5ft
Sound Performance - Tier 4 Final/EU Stage V - Standard
- Operator Sound Level (ISO 6396)
- 70dB(A)
- Machine Sound Level (ISO 6395)
- 111dB(A)
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (3)
- The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (4)
- The operator sound pressure level uncertainty is ± 2 dB(A)
Sound Performance - Tier 4 Final/EU Stage V - Suppression
- Operator Sound Level (ISO 6396)
- 70dB(A)
- Machine Sound Level (ISO 6395)
- 109dB(A)
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (3)
- The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (4)
- The operator sound pressure level uncertainty is ± 2 dB(A).
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard
- Operator Sound Level (ISO 6396)
- 70dB(A)
- Machine Sound Level (ISO 6395)
- 112dB(A)
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (3)
- The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (4)
- The operator sound pressure level uncertainty is ± 2 dB(A).
Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression
- Operator Sound Level (ISO 6396)
- 70dB(A)
- Machine Sound Level (ISO 6395)
- 110dB(A)
- Note (1)
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (2)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
- Note (3)
- The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.
- Note (4)
- The operator sound pressure level uncertainty is ± 2 dB(A).