Specifications
Engine
- Engine Power - ISO 14396:2002
- 449hp
- Engine Model
- Cat® C15
- Peak Power Speed
- 1600
- Gross Power - SAE J1995:2014
- 456hp
- Net Power - SAE J1349:2011
- 373hp
- Rated Speed
- 2000
- Rated Speed - 2,000 rpm - EEC 80/1269
- 373hp
- Rated Speed - 2,000 rpm - ISO 9249
- 373hp
- Bore
- 5.4in
- Stroke
- 6.75in
- Displacement
- 927in²
- Peak Torque (1,200 rpm) - SAE J1995:2014
- 1778lb/ft
- Torque Rise
- 16%
- Note (1)
- Two engine emission options are available: 1. Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. 2. Meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
- Note (2)
- Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternator.
Operating Specifications
- Operating Weight - Standard
- 97785lb
- Bucket Capacity Range
- 5.0-10.3 m³ (6.5-13.5 yd³)
- Operating Weight - High Lift
- 104005lb
- Rated Payload - Standard (Quarry Face)
- 11ton (US)
- Rated Payload - Loose Material (Standard)
- 14ton (US)
- Rated Payload - High Lift (Quarry Face)
- 11ton (US)
- Rated Payload - Loose Material (High Lift)
- 12.1ton (US)
- Cat Truck Match - Standard
- 770/735/740/745
- Cat Truck Match - High Lift
- 772/773
Transmission
- Transmission Type
- Cat planetary power shift
- Forward - 1
- 5mile/h
- Forward - 2
- 8mile/h
- Direct Drive - Forward 2
- 8mile/h
- Direct Drive - Forward 3
- 14mile/h
- Direct Drive - Forward 4
- 24mile/h
- Reverse - 1
- 5mile/h
- Reverse - 2
- 8mile/h
- Direct Drive - Reverse 2
- 9mile/h
- Direct Drive - Reverse 3
- 16mile/h
- Direct Drive - Reverse 4
- 25.4mile/h
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
- Load Sense
- Lift/Tilt System - Pump
- 2 × 110 cc variable displacement
- Maximum Flow at 2,165 rpm
- 123gpm
- Relief Valve Setting - Lift/Tilt
- 4050psi
- Lift Cylinder - Bore
- 7.5in
- Lift Cylinder - Stroke
- 45in
- Tilt Cylinder - Bore
- 6.7in
- Tilt Cylinder - Stroke
- 28.4in
Hydraulic Cycle Times
- Rack Back
- 4.5s
- Raise
- 9s
- Dump
- 3.5s
- Lower
- 5.2s
- Lower Float Down
- 4.3s
- Total Hydraulic Cycle Time
- 21.3s
Hydraulic System - Steering
- Steering System - Circuit
- Load Sense
- Steering System - Pump
- Piston, variable displacement
- Maximum Flow at 1,400 rpm
- 52gpm
- Steering Cut Off Pressure
- 4000psi
- Total Steering Angle
- 70°
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- ±12.5°
- Oscillation Angle - Chain Arrangement
- ±8.5°
Brakes
- Brakes
- ISO 3450:2011
Operator's Cab
- ROPS/FOPS
- ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Service Refill Capacities
- Fuel Tank
- 141gal (US)
- Fuel Tank - Short Lift
- 127gal (US)
- Cooling Systems
- 26gal (US)
- Crankcase
- 9gal (US)
- Diesel Exhaust Fluid Tank
- 6gal (US)
- Transmission
- 20gal (US)
- Axle Oil - Differentials and Final Drives - Front
- 49gal (US)
- Axle Oil - Differentials and Final Drives - Rear
- 45gal (US)
- Hydraulic System Factory Fill
- 87gal (US)
- Hydraulic System - Tank Only
- 34gal (US)
Sound Performance - Tier 4 Final / Stage V
- Operator Sound Pressure Level (ISO 6396:2008)
- 73dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 113dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 72dB(A)
- Machine Sound Power Level (ISO 6395:2008)**
- 110dB(A)
- Note (1)
- * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
- Note (2)
- ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
- Note (3)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
- Note (4)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
- Note (5)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Sound Performance - Tier 3 / Stage IIIA
- Operator Sound Pressure Level (ISO 6396:2008)
- 74dB(A)
- Machine Sound Power Level (ISO 6395:2008)
- 113dB(A)
- Operator Sound Pressure Level (ISO 6396:2008)*
- 73dB(A)
- Machine Sound Power Level (ISO 6395:2008)**
- 110dB(A)
- Note (1)
- * For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives.”
- Note (2)
- ** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701.
- Note (3)
- The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
- Note (4)
- The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
- Note (5)
- Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Dimensions (Approximate) - Standard Lift Linkage
- Ground to Top of ROPS
- 13.5ft
- Ground to Top of Exhaust Stacks
- 13.3ft
- Ground to Top of Hood
- 10.7ft
- Ground to Center of Front Axle
- 3.2ft
- Ground to Fuel Tank Clearance
- 2.3ft
- Ground to Lower Hitch Clearance
- 1.5ft
- Reach - Maximum Lift
- 7.1ft
- Clearance at Maximum Lift
- 10.1ft
- B-Pin Height - Maximum Lift
- 16.1ft
- Maximum Overall Height - Bucket Raised
- 22.4ft
- Rear Axle - Centerline to Bumper
- 10.3ft
- Wheel Base
- 12.5ft
- Maximum Overall Length
- 36.6ft
- Front Axle Centerline to Bucket Tip
- 13.8ft
- Note
-
- All dimensions are approximate.
- Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - High Lift Linkage
- Ground to Top of ROPS
- 13.5ft
- Ground to Top of Exhaust Stacks
- 13.3ft
- Ground to Top of Hood
- 10.7ft
- Ground to Center of Front Axle
- 3.2ft
- Ground to Fuel Tank Clearance
- 2.3ft
- Ground to Lower Hitch Clearance
- 1.5ft
- Reach - Maximum Lift
- 7.4ft
- Clearance at Maximum Lift
- 11.6ft
- B-Pin Height - Maximum Lift
- 17.6ft
- Maximum Overall Height - Bucket Raised
- 23.9ft
- Rear Axle - Centerline to Bumper
- 10.3ft
- Wheel Base
- 12.5ft
- Maximum Overall Length
- 38ft
- Front Axle Centerline to Bucket Tip
- 15.3ft
- Note
-
- All dimensions are approximate.
- Specifications are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
- Ground to Top of ROPS
- 13.5ft
- Ground to Top of Exhaust Stacks
- 13.3ft
- Ground to Top of Hood
- 10.7ft
- Ground to Center of Rear Axle
- 3.2ft
- Ground to Fuel Tank Clearance
- 2.3ft
- Ground to Lower Hitch Clearance
- 1.5ft
- Reach at Maximum Lift
- 8ft
- Clearance at Maximum Lift
- 10.7ft
- B-Pin Height at Maximum Lift
- 15ft
- Maximum Overall Height, Bucket Raised
- 20.9ft
- Rear Axle Center Line to Bumper
- 10.3ft
- Wheel Base
- 12.5ft
- Maximum Overall Length
- 35ft
- Front Axle Centerline to Bucket Tip
- 12.2ft
Dimensions (Approximate) - Quick Coupler and Fork
- Ground to Top of ROPS
- 13.5ft
- Ground to Top of Exhaust Stacks
- 13.3ft
- Ground to Top of Hood
- 10.7ft
- Ground to Center of Rear Axle
- 3.2ft
- Ground to Fuel Tank Clearance
- 2.3ft
- Ground to Lower Hitch Clearance
- 1.5ft
- B-Pin Height at Maximum Lift
- 15ft
- Rear Axle Center Line to Bumper
- 10.3ft
- Wheel Base
- 12.5ft
- Maximum Overall Length
- 35.4ft
- Front Axle Centerline to Bucket Tip
- 12.6ft
