Specifications
Tractor Engine
- Flywheel Power - Tractor/Scraper
- 304 kW (407 hp)
Scraper Bowl
- Scraper Capacity - Heaped
- 24yd³
Transmission
- Top Speed - Loaded
- 33.5mile/h
Dimensions
- Width - Overall Machine
- 141.1in
- Width - Tractor
- 133.1in
- Width - Inside of Bowl
- 120in
- Width - Outside Rear Tires
- 128.9in
- Height - Overall Shipping
- 158.6in
- Height - Top of Cab
- 142.2in
- Ground Clearance - Tractor
- 21.9in
- Front of Tractor to Front Axle
- 122.8in
- Axle to Vertical Hitch Pin
- 21.3in
- Height - Scraper Blade Maximum
- 20.5in
- Wheel Base
- 314.9in
- Rear Axle - Rear of Machine
- 114.1in
- Length - Overall Machine - Standard
- 551.8in
- Length - Maximum (Push-Pull)
- 613.2in
- Width - Overall Machine - Ladder Down
- 149.2in
- Width - Rear Tire Centers
- 90.2in
General
- Overall Shipping Height
- 13.22ft
- Overall Width
- 11.75ft
- Scraper Capacity - Heaped
- 24yd³
- Fuel Tank Refill Capacity - Scraper
- 216.1gal (US)
- Tires - Scraper
- 33.25R29**E3
- Width - Cut
- 10.3ft
- Maximum Depth of Spread
- 21.3in
- Top Speed - Loaded
- 33.5mile/h
- Rated Load
- 26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)
- 180° Curb-to-Curb Turning Width
- 38.71ft
- Scraper Capacity - Struck
- 17.1yd³
- Maximum Depth of Cut
- 12.4in
- Tires - Tractor Drive
- 33.25R29**E3
Engine
- Engine Model - Tractor
- Cat C13
- Flywheel Power - Tractor
- 407hp
- Note
- Cat C13 engine meets U.S. Environmental Protection Agency (EPA) Tier 4 Final/EU Stage IV engine emission standards.
- Rated Engine RPM - Tractor
- 2000r/min
Service Refill Capacities
- Hydraulic System
- 21.926gal (US)
- Crankcase
- 8.08gal (US)
- Transmission System
- 24.76gal (US)
- Cooling System
- 11.89gal (US)
- Fuel Tank
- 216.09gal (US)
- Diesel Exhaust Fluid
- 8.057gal (US)
Non Push-Pull
- Operating Weight - Empty
- 79787lb
- Overall Length
- 45.9ft
Push-Pull
- Overall Length - With Bail Down
- 51.1ft
- Operating Weight - Empty
- 80630lb
Cab
- Exterior Sound Level
- The exterior sound power level for the standard machine (ISO 6393:2008) is 118 dB(A).
- ROPS/FOPS
- Meets SAE and ISO standards
Safety Criteria Compliance Standards
- Rollover Protection Structure (ROPS)
- ISO 3471:2008 for up to 17 084 kg (37,664 lb)
- Brakes
- ISO 3450:1996
- Reverse Alarm
- ISO 9533:2010
- Falling Object Protective Structure (FOPS)
- ISO 3449:2005 Level II
- Seat Belt
- SAE J386:JUN1985
- Steering System
- ISO 5010:2007
Travel Speeds - Runout
- Transmission Gear - Seventh
- 24.8mile/h
- Transmission Gear - Fifth
- 13.6mile/h
- Transmission Gear - First
- 3.1mile/h
- Transmission Gear - Sixth
- 18.4mile/h
- Transmission Gear - Second
- 5.5mile/h
- Transmission Gear - Third
- 7.5mile/h
- Transmission Gear - Fourth
- 10.1mile/h
- Transmission Gear - Eighth
- 33.5mile/h
- Transmission Gear - Reverse
- 5.7mile/h
Implement Cycle Times
- Apron Raise
- 2.95s
- Bowl Raise
- 3s
- Ejector Retract
- 6.7s
- Bowl Lower
- 3.5s
- Apron Lower
- 3.8s
- Ejector Extend
- 5.2s
- Bail Lower
- 3.2s
- Bail Raise
- 1.8s
